Wind Turbines Vertical

The main source of wind energy is winds farming, which consists of classic windmills. However, an alternative design that allows electricity generation by vertical wind turbines has developed. This method is more efficient, cheaper, and more versatile.

An engineer created and constructed wind turbines with a vertical axis of rotation. The principles of physics are applied in a completely different way compared with the solutions now used in vertical wind turbines.


Wind Turbine Vertical – Quick And Versatile

The wind turbines correctly aligned with the wind, with the vertical rotation axis. The wind powers the rotor, which starts at winds of less than 1 meter/second via properly configured directing nozzles. This makes it possible to use even minimum wind movement. After acceleration, the rotor continues to spin. The self-supporting building allows you to build approximately 60 m high buildings. The stainless steel structure is sustainable, easy to mount, and well-chosen for transport, all fit into the ordinary TIR cars (no transport elements needed at night). Depending on the power necessary, the structure flexibly increased and reduced.

An excellent alternative to existing methods is vertical wind turbines. The permit and building process is fast and straightforward. Furthermore, the paperwork for regular windmills or solar farms can be tailored to the requirements of vertical plants. Many clients report ready-made documents to the maker. Naturally, many of these documents can be employed in power plants of the vertical axis and easily adapt to create a more efficient and modern system. In the initial stages, you can even modify the kind of gym.

Vertical Turbines – Advantages

Advantages of rotationally aligned wind turbines:

– modular design – allows the building of units with a power adapted to the receiver’s needs and can vary that power;

– wind start from less than 1 m/s – enables a significantly larger range of work and boosts the efficiency considerably;

It operates irrespective of the direction of the wind;

– need not break amid the winds of the hurricane;

– logistically appropriate TIR proportions – simple and inexpensive transportation;

– we create from the ground up – for more places available, faster administrative procedures;

– efficiency (fitness work time during the year) around 40% – so far unexpected;

– the average wind required is approximately 4 m/s;

– connectivity of reception equipment – air conditioning; conveyors, irrigation, ventilation, and others;

(9-18 months depending on the pace with which administrative clearances granted);

– No moving components outside of security

– lengthy life; 

– 10 years guarantee;

– the opportunity of adding an electricity module upon request (possibility of energy storage).


Wind Turbines In Vertical Direction – For Whom?

There are two sorts of interest in winds turbines on the vertical axis. Investors with great efficiency and the promise of large energy savings are encouraging the building of such facilities.

Wind Turbine

The rotor, which converts wind energy into mechanical energy transported to the generator, is the heart of wind farms. Normally the rotor has three blades (two-blade rotors are less common). The panels are constructed of polyester-coated fibreglass. The angle of the blades altered in more modern power stations. More often than not, at (15 to 30) rpm, the rotor rotates at 50 times to 1500 rpm. This speed is increasing.


Please enter your comment!
Please enter your name here